Robotics Bigmow Manual do Utilizador descarregar pdf (Página 14)

Installing the recharging station

Positioning the recharging station

When setting up the station, an ideal place must be found

which is both close to a power supply (220VAC) and on a rela-

tively level, steady surface, which allows at least 10 feet of

peripheral wire to be placed in a straight line in front of and

behind the recharging station.

The power connection must be made to a circuit breaker

(National Electrical Code Approved) safe for underground and

outdoor use.

The recharging station should be set back from the peripheral

wire in such a way that when your Bigmow goes to recharge, a

visible connection is made to the top and bottom charging

bars.

BIGMOW

1. Close to 220 AC power supply

2. Plug connected to a NEC approved

circuit breaker suitable for outside un-

derground service

3. Level surface

4. Peripheral wire straight for 10 feet in

front and behind station

5. Station to be set back from the periph-

eral wire line.

Recommendation for

the recharging station

PAGE 14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Sem comentários

Robotics Bigmow Manual do Utilizador Página 14